STRONG AND LIGHTWEIGHT
Bino can be easily bent due to our Patented two-piece design, which also allows to cover unaesthetic screws.
Extremely flexible, it can be used on yachts, pleasure boats, military, commercial and work boats, as well as on docks and piers. The possibilities are almost endless with Bino.
Impossibile caricare il modello 3D
All the advantages
of a modular system
The design of Bino allows you to replace the individual components separately over time.
It is supplied in customcut reels to avoid junctions and waste.
The advantage of Bino 40 is that it can be adapted to very complex curves, with both negative and positive acute radius.
The product does not need any pre-heating so the assembly is quick.
Bino 65 and 90 can be easily installed, also thanks to the optional support of a pre-drilled 2-meter bar. Available in two versions, Stainless Steel and Aluminum, the bar is recommended to reinforce the Fender Profile installation. The insert can be pressure-fitted.
Suitable for
- Yachts
- Pleasure boats
- Tenders
- Military boats
- Commercial boats
- Workboats
- Dock protection
- Pier protection
- Houseboats
Features
Installation
PVC Ral colours
Finish / Materials
316 L Stainless Steel 
Aluminum Series 2 pieces
with lip 
without lip 
pre-drilled bar for Bino 65/90 (optional) | Description | Version | Item | Colours | Weight | Min bend Rad | Packaging | Min. order |
|---|---|---|---|---|---|---|---|
| Bino 40 set of 2 pcs | with lip | 130-115-001-L | -B -G -W | 32 oz/yd 920 g/m | 1-3/4” 45 mm | coil | Special Order |
| Bino 40 set of 2 pcs | 130-115-001 | -B -G -W | 31 oz/yd 880 g/m | 1-3/4” 45 mm | coil | 78’ 24 m | |
| Bino 65 set of 2 pcs | with lip | 130-115-005-L | -B -G -W | 79 oz/yd 2.250 g/m | 2-1/8” 55 mm | coil | Special Order |
| Bino 65 set of 2 pcs | 130-115-005 | -B -G -W | 74 oz/yd 2.120 g/m | 2-1/8” 55 mm | coil | 39’ 12 m | |
| Bino 90 set of 2 pcs | with lip | 130-115-010-L | -B -G -W | 143 oz/yd 4.065 g/m | 2-3/4” 70 mm | coil | Special Order |
| Bino 90 set of 2 pcs | 130-115-010 | -B -G -W | 146 oz/yd 4.165 g/m | 2-3/4” 70 mm | coil | 39’ 12 m |
S/S bar & Aluminum bar
| Description | Item | Weight | Length | Height |
|---|---|---|---|---|
| S/S bar - Bino 65 and 90 | 130-110-165 | 10 oz/yd 300 g/m | 7’ 2 m | 1” 25 mm |
| Aluminum bar - Bino 65 and 90 | 130-110-185 | 4 oz/yd 135 g/m | 7’ 2 m | 1” 25 mm |
Without lip
For installation on flat surfaces
BINO 40 
BINO 65 
BINO 90 With lip
For installation with deck joint
BINO 40 
BINO 65 
BINO 90 Fitting steps
Bino 40 is made of 2 components, one base and one insert which covers the fixing screws.
The product fits cold thanks to its very high flexibility. Lay the profile on the ground around the boat or on the boat itself, the more the profile is stretched, the easier it is to install it.
Bino 65 and Bino 90 consist of 2 components and a pre-drilled Stainless Steel installation bar (supplied separately, as an option).
Lay the profile on the ground around the boat or on the boat itself, the more the profile is stretched, the easier it is to install it.
For installations on aluminum boats, we suggest the use of aluminum accessories.
Bino 40
Drill and screw the base directly to the boat.
Bino 65 & Bino 90
Drill and screw the base directly to the boat, using the same holes of the Stainless Steel installation bar as a guide (in case of its use).
Bino 40 & 65 & Bino 90
Install the insert by hitting it with a rubber hammer.
Bino 40 & 65 & Bino 90
Fixe the extremities of the profile with one or two screws and finish with the end caps or joint caps, which must partially overcome the end of the profile (they must not be fixed on its side).
Accessories
S/S joint cap and end caps
316 L Stainless Steel | Description | Item |
|---|---|
| S/S joint cap - Bino 40 | 130-500-615 |
| S/S end cap - Bino 40 | 130-500-515 |
| S/S end cap - Bino 65 | 130-500-570 |
| S/S end cap - Bino 90 | 130-500-575 |
PVC end caps
| Description | Item | Colours |
|---|---|---|
| PVC end cap - BINO 65 | 130-500-092 | -B -G -W |
| PVC end cap - BINO 90 | 130-500-095 | -B -G -W |
Black S/S end caps
Black 316 L Stainless Steel | Description | Item |
|---|---|
| 90° Black S/S end cap – Bino 40 | 130-500-516-BL |
| 90° Black S/S end cap – Bino 65 | 1130-500-571-BL |
| 90° Black S/S end cap – Bino 90 | 130-500-576-BL |
