SQUARED & STYLISH
Qbe Steel has been conceived for being an elegant and protective solution for boats with a Sandwich junction. Nevertheless, thanks to its specific design, it is easily adaptable to any flat surface as well.
This dual use allows it to be installed on any type of boat.
Impossibile caricare il modello 3D
The Materials
An extremely innovative product that combines 2 dierent materials.
Top of the notch PVC for marine use. Its flexibility allows it to follow the shape of the boat. 316 L Stainless Steel bar that grants elegance and protection to any vessel.
Why Qbe Steel
The multipurpose PVC base has been designed to ensure maximum impact resistance and at the same time a very low weight.
Quick and easy installation thanks to the modular design.
PVC base available in custom-cut reels to reduce waste and therefore costs.
Installation
options
Sandwich junction
Sandwich junction
Deck junction + Flat surface
Features
Installation
PVC Ral colours
Finish / Materials
316 L Stainless Steel Qbe Steel
PVC base 
Sphæra S/S bar | Description | Item | Colours | Weight | Min bending Rad | Packaging | Min. order |
|---|---|---|---|---|---|---|
| PVC base Qbe Steel 25 | 130-120-125B | -B -G -W | 48 oz/yd 1.370 g/m | 2-1/8’’ 100 mm | coil | 78’ 24 m |
| S/S bar Sphæra 25 | 130-130-125 | 16 oz/yd 465 g/m | 1-1/8” 30 mm | tube | 78’ 24 m | |
| PVC base Qbe Steel 35 | 130-120-135B | -B -G -W | 43 oz/yd 1.240 g/m | 2-1/8’’ 100 mm | coil | 78’ 24 m |
| S/S bar Sphæra 35 | 130-130-135 | 30 oz/yd 860 g/m | 2-7/8” 75 mm | tube | 78’ 24 m | |
| PVC base Qbe Steel 50 | 130-120-150B | -B -G -W | 54 oz/yd 1.540 g/m | 2-1/8’’ 100 mm | coil | 78’ 24 m |
| S/S bar Sphæra 50 | 130-130-150 | 42 oz/yd 1.180 g/m | 3-7/8” 100 mm | tube | 78’ 24 m |
flat surfaces
For installation on flat surfaces sandwich junction
For installation with sandwich junction
QBE STEEL 25 
QBE STEEL 35 
QBE STEEL 50 Fitting steps
On boats with a Sandwich junction the base can be mounted by positioning the recess either above or below according to need.
Fix the Stainless Steel bar starting from the bow. Bend the bar in the middle so that both sides have about the same length. Then cut the side strips to the correct size and complete the installation using joint caps.
Cut the profile, finish with silicone on the head of the bar and install the end cap which must partially overcome the end of the profile (it must not be fixed on its side).
Accessories
S/S joint caps
| Description | Item | Unit |
|---|---|---|
| S/S joint cap - Sphæra 25 | 130-500-125 | 1 piece each bar necessary |
| S/S joint cap - Sphæra 35 | 130-500-135 | 1 piece each bar necessary |
| S/S joint cap - Sphæra 50 | 130-500-150 | 1 piece each bar necessary |
Downloads
